40 Free Online Working At Height CSCS Mock Test Questions

Hey Guys! If you wish working on the constructions site, for sure that you know what you need to apply for a construction work, right? A Cscs card is always necessary and important for people who want to work as constructors on the construction site. Thus, in order to obtain a Cscs card in your hand that you need to pass the health, safety and environment test. Most basic knowledge which will be checked in your Cscs test about basic background on the site, behavioural case study, fire safety, working at height, noise, and lots other areas.

You might be also interested in CSCS useful information:
Top 20 Meaningful Spot of General Responsibilities – CSCS Test Revision
20 Short CSCS Test Revision On Fire Prevention And Control To Pass Successfully
18 Most Useful Information for CSCS Test Revision At Work Height
Some Basic Information of Slips, Trips and Falls on Construction Site You Must Know

A real Cscs test, just consists of 50 multiple choice questions and it is included all health and safety on the construction environment that you have to face in your real Cscs test. Consequently, it is not easy to take a Cscs card without practicing and studying. Because the requirement of construction working environment that you usually work at height. Addition to this, there are the risks and hazards on working at height such as slips, trips, falls. As a result, the “working at height” section which is one of sections very important in your real Cscs test. Actually, there are 50 multiple choice questions to be completed during 45 minutes in the real Cscs test, including 32 questions focus on the basic knowledge on the site, 12 questions for the behavioural case study and 6 last question will be taken from the specialist knowledge. If you want to take successfully a Cscs card that you have to score 47 out of 50 questions. 6 questions which is specially important to win or fail. Because of these, here we suggest 40 Free Online Working At Height CSCS Mock Test Questions to help you practice efficiently in a lot of free online CSCS mock test questions and full correct answers at our site. 40 Cscs mock test quiz questions below which are examples from the real test that you will face when taking test. Unlike other construction site, you will get full answers immediately as soon as your submit. After finishing 40 questions below for working at height. Let’s make sure that you have fully understanding from those questions so that you can move on our 50 full Cscs mock test questions or behavioural case study questions. Enjoy us to have a good preparation for your real test now, and don’t forget to leave your comment below to let us know about surprising result.

Please visit the link below to get full questions and answers:

http://cscsexams.com/40-free-online-working-height-cscs-mock-test-questions.html

Why does a work environment need to be kept clean?

•  a. To deter rodents and other such animals
•  b. To reduce the risk of slips and falls
•  c. To protect the environment
•  d. All of the above

Who should erect and dismantle a scaffold tower?

•  a. Anyone who has worked on a scaffold tower before can do this
•  b. Only trained, competent and authorized people should carry out these tasks
•  c. Anyone with the instruction book in their possession can carry out these tasks
•  d. Anyone who has witnessed these tasks being carried out can perform them as well

What should you do if you need to store materials on a flat roof but you cannot fit edge protection? (Choose THREE answers)

•  a. You must ensure that the materials are stored in such a way that they cannot fall
•  b. You must ensure that you install a cantilever safety net below the roof edge
•  c. You must ensure that the materials do not endanger your colleagues or others in that area
•  d. You must ensure that you and your colleagues can have safe access to the stored materials

What are class 3 ladders?

•  a. Class 3 ladders are ladders which are designed for use in industrial and construction environments only
•  b. Class 3 ladders should not be used on site as they’re designed for domestic purposes
•  c. Class 3 ladders should only be used by trained workers onsite
•  d. Class 3 ladders are the recommended choice for working near overhead cables

If you’re using inflatable air bags as a means of fall arrest you must ensure that the inflation pump:

•  a. Is electrically powered
•  b. Is turned off every couple of minutes to avoid the airbags from over inflation
•  c. Is turned off as soon as the airbags are full
•  d. Stays on at all times when there’s work being carried out at height

What should you do if you need to use a safety lanyard but the stitching is damaged?

•  a. Dispose of it and carry on working without one
•  b. Continue using the lanyard only if the damaged stitching is less than four inches
•  c. Ask for a replacement and do not start working until you have a suitable replacement
•  d. Continue to use the lanyard and get another one at the end of your shift

Using the Beaufort Scale is vital for your safety while working at height externally because it measures:

•  a. How much weight you can store safely on a roof
•  b. How much weight you can store safely on a scaffold
•  c. How many people can be on a roof at the same time
•  d. The wind speed

What is the maximum permitted gap between the guard rails on a working platform?

•  a. 300mm
•  b. 470mm
•  c. 500mm
•  d. 520mm

What should you do if you discover a rung missing near the top of the ladder you’re about to use?

•  a. Use the ladder but make sure you’re very careful when going over the missing rung
•  b. Stop using the ladder and report the defect immediately
•  c. Flip the ladder so the missing rung stays closer to the ground
•  d. Use the ladder but make sure a colleague holds the ladder while you’re on it

Guard rails are essential for safety while working at height, these should be fitted to a working platform when:

•  a. There’s a possibility you could fall 5 metres
•  b. These should only be fitted if you need to store materials on the working platform
•  c. There’s a possibility of you getting injured if you fall
•  d. There’s a possibility you could fall 10 metres

Who can assemble, dismantle or change a tube when you are fitting scaffold?

•  a. Someone who thinks they are able to do it.
•  b. Some who has the right tools for the job.
•  c. Someone who is competent and authorised.
•  d. The project manager.